New submersible pump sets for domestic, agricultural and commercial borewells — sized to your bore depth and water table, supplied with cable, panel and installation.
A pump that's undersized for the bore struggles and burns out early. One that's oversized wastes power and can run the borewell dry. We size the set to your actual bore depth, casing diameter and water yield before we quote anything.
A rough starting point — the exact set depends on your bore depth, casing size and daily water need. We confirm on the call.
| Use case | Typical HP | Notes |
|---|---|---|
| Independent home, overhead tank | 0.5 – 1 HP | Single-phase, shallow to medium depth bores |
| Apartment block / multiple floors | 1 – 3 HP | Single or three-phase depending on load |
| Small farm or garden irrigation | 3 – 5 HP | Three-phase, seasonal duty cycles |
| Larger agricultural land | 5 – 15 HP | Three-phase, higher lift and flow rate |
| Commercial / industrial supply | Assessed on site | Panel and protection sized to load |
Matched HP, stage count and cable length for your bore.
DOL or star-delta, sized to the motor and supply.
Pump lowered on-site to the correct depth and secured.
Run under load and checked for flow, current draw and noise.
Tell us your bore depth, casing size and what the water is for (home, apartment, farm), and we'll recommend a set on the call — a site visit isn't always necessary just for sizing.
Yes. If your existing cable is in good condition we can reuse it and quote the pump set alone.
We are a leading dealer for Samudra Pumps and keep their domestic and agricultural range in stock. Ask us about other brands on request.
Yes — lowering, wiring and testing are part of every pump sale, not a separate charge.
Call now for same-day quotes and stock availability.